man, yall sure do give me more motivation to get this thing done!!! To answer some of yalls questions....
once complete the truck will be 4 linked front and rear, coils front and rear, and dual shocks at each corner. cross over steering with ram assist using a bronco box from a 78 bronco. front axle is also from a 78 bronco (dana 44). front axle will also be cut and turned. the rear axle is still an 8.8 but from a 96 f150. swapped my 5.13s from my old 8.8 to the new one. i decided to go with full widths to aid in stability. all of the ifs brackets have been cut out. a new crossmember has been welded in place. a new 1 ton dual cardon driveshaft will also be fitted. the cage has been fitted for mounts for an np205 divorced tcase, that will me pneumatically shifted. im deciding not to run it right now tho... more on that later. as far as power goes. i will temp be running the 4.0 with sct programmer, intake, exhaust, and coil pack. i say temp cause i am working on swapping in a cummins 4bt. im not sure which tranny im going to run yet tho. thats also why i dont want to run the tcase. no point in having 3 driveshafts made now if theyre going to need to be modified later. all work is being done by me so if you have any questions feel free to ask. i will be posting more pics here soon. also since i have yalls attention... i still have a full console im selling and also the lift that was on this truck before. its brand new thanks to fabtechs warranty and the help of 4wheelparts. so let me know if yall are interested.