My Old 01 Trac

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Carlos Reyes

Member
Joined
Apr 8, 2005
Messages
44
Reaction score
0
Location
Ft.Lewis, WA
2001 Sport Trac

96,000 miles



[Broken External Image]:

[Broken External Image]:

[Broken External Image]:

[Broken External Image]:



Interior -

Custom Black and Silver

3 8" JL Audio Sub's

Pioneer Mids and Deck

Dynamat



Exterior -

20" black rims

Blue Eurolights

Calipers and Drums painted Black

Fiberglass Snug Top Tonneu Cover

Biller Grille

Altezza Euro Tail Lights

Billet Third Break Light



Engine -

Optima Battery

Magnaflow Exhaust 2/1 " piping

JBA Headers

Eaton ( X Charger ) Supercharger

K&N Cold Air Intake

SCT X3 Tuner (Replaced my Superchip)

Edelbrock Stage III Heads

Crane Cams Shorty Competition Regrinded





 
Keep us posted when its all done. Have you done anything with the suspension & handling? With that kind of power you are going to need it.



Recommendation:

Just remember you should NOT replace the front bar unless you have replaced the back one already with either the Explorer Express rear sway bar or the ADDCO rear sway bar.



Also, I recommend 1-1/4" wheel spacers on the rear too.



After you replace the rear sway bar do the front sway bar, or replace both at the same time, you can get the one by ADDCO, and can be purchased from site sponsor ZabTeck. The ADDCO front sway bar comes complete with new, and shorter, front end links.



 
Engine -

Optima Battery

Magnaflow Exhaust 2/1 " piping

JBA Headers

Eaton ( X Charger ) Supercharger

K&N Cold Air Intake

SCT X3 Tuner (Replaced my Superchip)

Edelbrock Stage III Heads

Crane Cams Shorty Competition Regrinded





Jesus! That Piggy Bank must be Squeeling!!!!! For the Love of All that is Holy post some Dyno Test Results!!!!



I think this is the most powerful ST I've heard about!



 
Last edited by a moderator:
Just purchased Eaton Super Charger set for 12 lbs of boost for Stage 3 Heads and regrinded cam. Hope to install in the next three months





wait 12lbs? I'm pretty sure she shouldn't be over 6lbs....
 

Latest posts

Top