It does. I'm going to say it's in the same place as in my '02.
Behind and down from the ignition coil, on the back of the valve cover, between the cover and firewall.
It has a u shaped metal tube bent around it with 2 coolant hoses (small) attached to the metal tube.
It's somewhat confined where the valve is. What I ended up doing was taking a screw driver between the valve and the metel U tube that surrounds it with the lines. I put enough pressure on the metal tube and broke of a bit of the plastic that hold the U tube within the valve that I was able to slip it over the valve. I then just twisted the valve off (it's a twist-lock type). The new valve (I got it via special order from Ford) comes with the metal U tube attached. I attached the lines to it then just twist locked the valve back in. I took me about 15 minutes doing it that way.
