hal keiner
Active Member
My front power window on the drivers side only goes down and inch or so and stops while the 'down button' is being held in. The window goes back up and closes OK when I push the "up button". If I physically push down on the window while activating the "down button" the window still stops after opening one inch or so and does not give at all. It does not feel like a soft friction like blockage, such as from an unlubricatred window seal that is holding the window from going down. More like a hard immovable something stopping the window from going down. Any ideas on what the problem and fix might be?
I probably will need to remove the inside door panel to see what I can see, but I thought I would post this question in case this particular sympton is easily recognized and the fix known. Then I can have the replacement part already available when I have the door apart.
I probably will need to remove the inside door panel to see what I can see, but I thought I would post this question in case this particular sympton is easily recognized and the fix known. Then I can have the replacement part already available when I have the door apart.
Last edited by a moderator: