sparkplug wires order on coil?

[Jeremy D]

so i replaced the spark plugs and wires, my wife said that the trac kinda bogs down at 45mph.

i guess i could have mixed up the wire hooking up to the coil.

what order should they be in?

i have

1 2 3

4 6 5

coil





3 6

2 5

1 4

engine

 

[Todd Z]

Here...

Todd Z



[Broken External Image]:

 

[Jeremy D]

thank you, ill check that when i get home. is that the only thing that migt have changed and cause that problem?

 

[Todd Z]

Could be a broken plug, a wire that is not locked on the plug correctly, OR even a broken vacuum line or something was knocked loose when changing the wires...



Todd Z

 

[Tom Schindler]

What plugs did you use?



As for getting a wire mixed up, not your problem. A misfire issue on 2 cylinders would have no power and throw the CEL.



What plugs did you go with?





Tom

 

[Jeremy D]

I used motocaft plugs and bosch wires.

I just checked, I did have the plug wires correct, boots are secure on both ends.

I did find that I had that metal tube coming off the intake bent kind werid might allow air in. Also found this could someone tell me what it is and where it goes?

[Broken External Image]:

 

[Todd Z]

That hose comes from the firewall and goes to either the heater control switch on the front of the motor( Follow the heater hoses,the switch is mounted in that hose that goes to the water pump) OR it goes to the charcoal canister under the air filter box..



Todd Z