Steering Column Wire Harness

[Ryan Schaecher]

So, rear break lights stopped working. Pulled the front dash apart to look for loose/broken wire at the typical spot: top harness.



Sure 'nuff, one wire was loose, that I could see. When I pulled it all apart to fix it, there were 3 more that were loose.



Now, I don't know for sure where each goes. I can guess, but want to be sure.



See the pics.



Blue (DC Power? Turn/Hazard Flasher?)

White w/ Blue Stripe (Right Turn Signal?)

White w/ Red Stripe (Turn/Hazard Flasher? Neutral?)



Everything is getting a good slathering of silicone, and seriously considering disconnecting the tilt arm.





[Broken External Image]:

[Broken External Image]:

[Broken External Image]:

 

[Ryan Schaecher]

Never mind, found it. May post a project with the diagram.

 

[Steve McKellop]

Here are both MFS connectors. Feel free to include them in your project if you wish, they're in my library. Sorry I didn't get them posted before you figured it out for yourself.



[Broken External Image]:

[Broken External Image]:

[Broken External Image]:

 

[Chris Crawford]

I had the same problem and all you have to do is get the pig tail from Ford and the metal connectors slip out of the grey plug and into the new grey plug. The part # is WPT-611.

 

[default user]

See how I corrected the problem in this project I posted:



http://www.mysporttrac.com/MySportTrac/projects/Steering_Column_Wiring_Repair_Gen1.pdf