sway bar measurments

[Michael Johnson 2]

Can anyone tell me the diameter of the front sway bar so i can purchase the right size bushings. Also how long are the end links for the front and does it matter that i lifted the front 3" with TT. I really need to replace the front bushings bad and would like to do it to day. Thanks in advance for any help. :banana:

 

[Todd Z]

1.25 for 4wd front bar



I would recomend getting longer end links too...



Todd Z

 

[Mark K 2]

1.25 for 4wd front bar

aka, 31 mm

 

[Rodger Tellefson]

Big Johnson does not have a 4x4 unless his profile is not correct.



The 4x2 Stock bar is 1.00".



Something to consider is the ADDCO front sway bar which is 1.50"; it comes with new bushings and new end links.

 

[Michael Johnson 2]

if the bar is only 1" when that is converted to mm it comes out to 26.5 that seems a little small. and does any one have any info on the size of the rear end links.

 

[Dreman]

1" dia should be 25.4mm.

 

[Michael Johnson 2]

Sorry your right dreman. Does that sound right for the diameter of the front sway bar for an 01 ST 2wd

 

[Michael Johnson 2]

Actual size after 3 trips to the part store is 1 1/8"

 

[EddieS'04]

Also how long are the end links for the front and does it matter that i lifted the front 3" with TT.

You will need longer front end links. For proper bar action. The ends of the bar need to be level. There are performance end link kits, that are varied lengths.