Mark S
Member
This is what you get in the kit. Included are 2 tow hooks, 2 upper and 2
lower mounting brackets, 4 bolts (15mm) and instructions. Tools required are
a torque wrench and/or socket wrench w/ 15mm, 10mm and 8mm sockets.
Remove undershield
This is a view of the mounting plate where you will attach the tow hook. The
15mm nut (red arrow) will need to be removed so that you can slide on the
lower mounting bracket - then replace and tighten nut.
This image shows the upper bracket (red arrow) and lower bracket (blue
arrow).
Tow hook attached to the brackets and mounting plate with two 15mm bolts
(included). Repeat installation process for other hook.
Final look of the tow hooks installed.
lower mounting brackets, 4 bolts (15mm) and instructions. Tools required are
a torque wrench and/or socket wrench w/ 15mm, 10mm and 8mm sockets.
Remove undershield
This is a view of the mounting plate where you will attach the tow hook. The
15mm nut (red arrow) will need to be removed so that you can slide on the
lower mounting bracket - then replace and tighten nut.
This image shows the upper bracket (red arrow) and lower bracket (blue
arrow).
Tow hook attached to the brackets and mounting plate with two 15mm bolts
(included). Repeat installation process for other hook.
Final look of the tow hooks installed.
Last edited by a moderator:
