window seal

[scott adams]

I have an 01 ST that the front door seals are leaking at the top rear corners, does anyone know a fix for this, not sure if we can get replacement seals.

 

[Mike Wilson]

Hey Scott, this worked on mine. Don't be stingy with the conditioner/protectant!

:supercool:

 

[scott adams]

Already did the door seals, now its the window seal/channel are the top rear corner of the window. i know the 01's had some bad seals .

 

[Mike Wilson]

If it's shrinkage where its pulling away from the door frame, which is common in that area, that's a hard fix. Try stretching the seal a little bit when it's warm, and filling the gap between the seal and the door with some silicone. Next fix is replace...

 

[swshawaii]

Like most things, prepping is the key for good results. Bonding surface must be clean before applying. GL

 

[Mike Wilson]

Again, with swshawaii on this one. Window tracks build up crud over the years, which adds to any problem, and hurts a potential fix. Denatured alcohol, and an old microfiber cloth on a trim tool or popsicle stick would be good to clean this area up before applying any type of sealant. Let us know...

 

[Albert Essex]

Check these guys out am sure they have replacement door seals