Windshield Washer T fitting

Ford SportTrac Forum

Help Support Ford SportTrac Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Adam Smith

Active Member
Joined
Oct 2, 2003
Messages
178
Reaction score
19
Location
San Diego, CA
What engine do you have?
V6 engine
What year is your Sport Trac?
2004
What Generation is your Sport Trac?
1st Gen Owner
Don't know what category this fits in...

2004 Trac, windshield washer stopped spraying fluid, even though I could hear motor running and it was full. Inspection revealed plastic T fitting between fluid reservoir, and R/L side nozzle hoses was disconnected. After pulling apart, all three sides of T have left broken plastic in hoses. Don't know how I'm going to get them out. Any suggestions? And any suggestions on where to get replacement T? Thank you.

 
Last edited by a moderator:
Was advised to go to Home Depot and just replace with drip lines....
 
I thought screwing in a metal / wood screw and pulling with pliers might work... will update.
 
Auto parts stores have the tee fittings in stock. Sometimes it will be a stepped fitting to fit several different hose sizes with the same fitting. If that is the one you find, just snip off the smaller bits to allow full flow for your hose size.
 
pulled the plastic parts out, well they disintegrated, when I screwed in a sheet metal screw. Now to get a replacement plastic t.
 
Top