Larry Michael
Member
- Joined
- Dec 21, 2013
- Messages
- 68
- Reaction score
- 39
- Location
- Grand Junction, CO
- What engine do you have?
- V8 engine
- What year is your Sport Trac?
- 2010
- What Generation is your Sport Trac?
- 2n Gen Owner
Bought it used in 2013 with 37,000 miles on it. Now at 96,000 miles.
Factory adds: the usual features with the Limited package and Rapid Spec 201A 4x4 LTD convenience package plus 4.6L 3-valve V8 engine with 6-speed automatic transmission and non-limited-slip rear axle (3.55 ratio), power moonroof with overhead console, tonneau cover.
Rapid Spec 201A added a lot of really nice features to the truck, including the Class 3 trailer hitch. I forgot it had the block heater until one day when I was cleaning the grille and found the plug. That was a good find since the next winter we had below zero weather and was nice to pre-heat the engine.
Aftermarket adds: bug deflector for hood, rain shield for rear window, Sport Trac bed mat, neoprene seat cover for driver's seat.
Personal adds: 1/4" custom-cut plywood sheet for more convenient use of rear seat in cargo mode. It bridges the gaps between the seats and between the seat and the rear of the cab to give a flat surface. I covered it with automotive carpet. Installed more tailgate seals to reduce dust entering closed bed on dirt roads.
Built this weekend: custom bed extender made with 3/4" plywood fastened into the bolt holes in the tailgate opening. Pics to come in a separate thread.
Factory adds: the usual features with the Limited package and Rapid Spec 201A 4x4 LTD convenience package plus 4.6L 3-valve V8 engine with 6-speed automatic transmission and non-limited-slip rear axle (3.55 ratio), power moonroof with overhead console, tonneau cover.
Rapid Spec 201A added a lot of really nice features to the truck, including the Class 3 trailer hitch. I forgot it had the block heater until one day when I was cleaning the grille and found the plug. That was a good find since the next winter we had below zero weather and was nice to pre-heat the engine.
Aftermarket adds: bug deflector for hood, rain shield for rear window, Sport Trac bed mat, neoprene seat cover for driver's seat.
Personal adds: 1/4" custom-cut plywood sheet for more convenient use of rear seat in cargo mode. It bridges the gaps between the seats and between the seat and the rear of the cab to give a flat surface. I covered it with automotive carpet. Installed more tailgate seals to reduce dust entering closed bed on dirt roads.
Built this weekend: custom bed extender made with 3/4" plywood fastened into the bolt holes in the tailgate opening. Pics to come in a separate thread.
Attachments
Last edited:
