Search results

I have drilled & taped all my ball joints [I do this on all my vehicles] Front drive shaft very expensive to replace so take of clamp inject moly grease into it then fit narrow width hose clamp

PUT HARLEY DAVIDSON decals on it,I find it so stupid that they get away with all thier horrible noise,now a nice scream from a real bike is ok ??????

I live in Canada just picked up BMW R1000RT with fairings etc from California, with tail gate down no problem,only loered rear 1/2 in,in fact the truck handled better with the weight,

I had same problem on my 01,I live in Can, & at the time there was only 1 type of pad available,just replaced again & now the jobber has a choice 6 types, have moved to middle grade,asthe very hard grade shortens the life of your disc,they cost a lot more than pads

Thanks Mike, I guess will take it out manana

Help ,I fitted LED stop & tail lights & of course with the lower resistance the indicators flash to fast,problem is I cannot locate the flasher unit to replace it with a heavy duty one?? I have the dash out & it sounds like it is in a black box on wheel side of the radio?? am I correct in...

Go to your local auto parts store they sellit by the yd,makes it very reasonable & you can custom fit with scissors

has anyone out there done or have info on a diesel engine swap for 01 sport track,??ranger diesel or other,??? thanks

I had been looking at them in Mexico & few years ago the ford web site said that they were going to release them in Canada so on returning to Can after winter in Mexico I went to my dealer & ask when I could get one,the sales person did not believe me so we looked up the site & there it was, we...

Sorry no pics but I drilled from underside & the holes cannot be seen

Just a little idear that works, on my 01 sport trac the lower plastic molding trim kept pulling away from body,I found it was full of gravel & had become to heavy so I hosed it out, 6mnths later the same thing happened so hose it out, I then drilled 8 1/2in holes in bottom of the plastic & for...

Great tires ,if prob go see your dealer if not satisfied contact thier supplier

I am running the stock size michelins CTs,I drive some long distances & around town have found the 36psi cold works really well, as my tire shop sugested, may drop when of road to 30 psi

get up to date & fit new MP3/CD player They can hold a large amount of music etc ,only 150$ in canada

Dont bother removing box just use a hole saw & carefully cut 3 2in holes in sides,that will give you all the air the filter can handle,it works well & apears standard,gives slight roar on hard acceleration

Thanks for help ,I will stay with 4.10

I own an 01 Sport trac 4X4 with 4.10 gears,very happy with this trouble free SUV,Question I hear people talk about 3.73 rear ratio,I do no mud plogging & very litle of road ,Just rocky non paved roads each winter in Mexico {made top of 16000ft volcano last winter} Can anybody give me pros & cons...

You might try Michelin Cross Terrain ,I put them on ayear ago & am well pleased,last winter easily made it up to top of 16000ft Volcano in Mexico, good traction all the way engine running out of air the only problem, they will not be good in mud, run very quite as you expect from Mr Michelin