Search results

i just had similar symptoms, for me it was the passenger tie rod. shudder when going slow but normal when at speed.

same thing happened to me a few years ago. ups never came back for it so i delivered it.

check out this tire and wheel calculator. it should give you the answers you need. http://www.rimsntires.com/specs.jsp

i am not sure what he did. what he didn't do is spend $250 on alignment tools. it's only a gamble if you put it back together without making sure it's right. there are a lot of automotive repairs made everyday without the "required" tools. weather or not the cost savings vs extra time spent...

my brother just did this in his explorer. he did not buy the tools. so that being said you can do it with out the tools. i think he said he put everything at tdc then made a jig to hold the cams. he did it by himself started on sat evening and finished in monday after work. pulled motor...

mine was doing the same thing, i took the latch out to lube it and noticed it was slightly bent. looking at it from the side the bottom was wider the the top allowing a little tab to stop the latches from releasing. bent it back and it now works perfect.

in the U.S. over a million growths are removed from women's uterus-es every year. i can assure you being pro-life has nothing to do with controlling women. the people that fight for "choice" are the same people that think it's ok for the government to force citizens to buy into private...

how much? got any pics?

mine was doing the same thing. when i took the door panel off i noticed the regulator was twisting and rubbing on itself. it is a scissor type regulator and one arm was cutting into the other causing very slow movement. i was able to bend it back so the window works but now the window is...

found it http://www.autotrader.com/cars-for-sale/vehicledetails.xhtml?zip=22556&endYear=2014&modelCode1=SPORTTRAC&showcaseOwnerId=73091&startYear=1981&makeCode1=FORD&sellerTypes=b&searchRadius=200&maxPrice=22000&mmt=[FORD[SPORTTRAC[]][]]&minPrice=20000&listingId=339467828&listingIndex=13&Log=0

my o.d light was flashing when i bought mine. did some research and found the valve body gaskets to be a problem on these transmissions. when i pulled the valve body it was obvious where the gasket had failed because pieces were missing. the updated separator plate with bonded gaskets was...

looks good. what did you paint the bumpers with? i have been thinking about doing mine. i am thinking about using the krylon fusion but i am not sure of its durability.

behind the passenger airbag. if you pull the the vent off the top of the dash you can use a flashlight to look into the opening through the windshield from outside the truck.

same problem with mt 2001. the valve body gaskets are known to go bad. the updated separator plate has bonded gaskets. i did mine myself using a you tube video as a guide. easy, cheap and fixxed the problem. i have read that if you continue to drive it you will burn up the clutches and...

my o.d light was flashing when i bought mine. did some research and found the valve body gaskets to be a problem on these transmissions. the updated separator plate with bonded gaskets was about $60 add the filter, fluid and a few hours laying in the driveway. relatively cheap and easy...

1st gen has 3 holes in each corner not positive about the 2nd. they do have little 1/2" or so plastic plugs in them. the 2nd gen has 3 holes in the brackets so i think it is safe to assume 3 holes in each corner as well.

i would not pay anywhere near $500. i had mine for sale for $200 then $100 for months and wound up trading it for something of much less value just to get it out of my garage. it did have slight damage to one corner but had keys latches and screws. you can still install it without the...

sold

nobody?

this thing is taking up to much space $100 gets it. i have what i believe is a 07-2010 oem hard cover(does not fit my 01). one corner has slight damage. comes with the 4 strikers and 2 keys. looking to get $200. i am in port st lucie fl. copy paste for pics...