1st gen brakes

[mcarroll02]

Just curious what everyone is running on their 1st gens as far as brakes go. Ive been eyeballing the powerstop z36 pad and rotor kit, but i have never had any dealings with them. Most of my older trucks i just run the factory rears with ceramic pads up front(f250s and f350 with factory hd brakes)

 

[curtis james]

Depends on your use, if you are going to haul trailer then run something like power stop etc, i beefed mine up and it was worth the little extra money..if just a daily driver then not so much. but brakes are not something to go cheap. brake dust is another factor. i would do like you are thinking with the power stop.

 

[mcarroll02]

Depends on your use, if you are going to haul trailer then run something like power stop etc, i beefed mine up and it was worth the little extra money..if just a daily driver then not so much. but brakes are not something to go cheap. brake dust is another factor. i would do like you are thinking with the power stop.

I did wind up going with the z36 kit. Awesome brakes for my daily. I have no intention of pulling anything other than my little adventure camper that im designing. Kinda a crossover between a full blown overlander camp trailer and a teardrop. If i need to haul anything, i generally will use either my f250 or my f350.

 

[Todd Z]

Wagner rotors, akibono pads, FLUSH the brake fluid and go.