I have a questions assoc. w/these pics!!

[Dennis Hutchinson]

This is my first time adding pictures so hopefully this works. If you look at the pictures, I have a question about the hose that feeds into the housing running from the air filter to the 4.0L cover. If you look closely the hose I am referring to has the numbers 22121 on it. I am wondering if this connection should be tight. Right now there is a lot of play around the hose where it goes into the housing and I am wondering if I need to clamp this or not.

thanks,

Dennis



[Broken External Image]:

[Broken External Image]:

[Broken External Image]:

[Broken External Image]:

 

[TrainTrac]

You don't need to clamp it. You can actually replace it with one of these from our fine site sponsor/owner, Zabteck Performance:



Intake Breather Tube Bypass Kit

 

[TRACket Paul]

Mine is the same, 67,000 miles.

 

[Woppy V]

if u want just zip tie it....

 

[TomT]

I'd just take it out.

90% of the stuff under your hood is unnecessary anyhow.

 

[EddieS'04]

Loosen the clamps at both ends of the intake hose. Then roll it into proper position.

 

[Kevin Palmer]

Fast Eddie beat me to it.



As noted, it does not need to be a tight fitting, but if you loosen the clamps at each end of the main hose and twist it a bit, you will get a more "square" or correct fit on your bypass tube...