- Joined
- May 16, 2022
- Messages
- 172
- Reaction score
- 81
- Location
- Palmetto
- What engine do you have?
- V6 engine
- What year is your Sport Trac?
- 2002
- What Generation is your Sport Trac?
- 1st Gen Owner
Missing screws
- Thread starter oknopa
- Start date
Help Support Ford SportTrac Forum:
- Joined
- Mar 7, 2020
- Messages
- 879
- Reaction score
- 588
- Location
- Earth
- What engine do you have?
- V6 engine
- What year is your Sport Trac?
- 2001
- What Generation is your Sport Trac?
- 1st Gen Owner
Looks like a Oil\TransDipStick bracket bolted to side of V6~4.0L~SOHC?
If you have a Tap+Die kit, try several Taps 'til you find a fit then a run to the hardware\parts store.
Of if you're like me, dig thru containers of hardware scavenged over 30+ years 'til you find a fit !!!
If you have a Tap+Die kit, try several Taps 'til you find a fit then a run to the hardware\parts store.
Of if you're like me, dig thru containers of hardware scavenged over 30+ years 'til you find a fit !!!
- Joined
- Feb 27, 2009
- Messages
- 5,679
- Reaction score
- 542
- Location
- Kailua-Oahu, Hawaii
- What engine do you have?
- V6 engine
- What year is your Sport Trac?
- 2005
- What Generation is your Sport Trac?
- 1st Gen Owner
That's a strangely overbuilt ignition coil bracket. Mine was missing the rearward bolt from the factory. If you look the coil is also bolted from the top. Won't move missing the lower two bolts.
- Joined
- May 16, 2022
- Messages
- 172
- Reaction score
- 81
- Location
- Palmetto
- What engine do you have?
- V6 engine
- What year is your Sport Trac?
- 2002
- What Generation is your Sport Trac?
- 1st Gen Owner
Ok, thanks
