Looking for a suspension lift ... like two inches i already have a body lift , and added leafs in the back and cracked the torsion bars a little in the front but having trouble finding some after market stuff. I also don't want to just crack the bar even more. Do rangers have the same suspension? If I could get some opinions or suggestions that would be great
???? Suspension lift 4bt
- Thread starter Jriddler
- Start date
Help Support Ford SportTrac Forum:
Fordtruckfan89
Member
These trucks already have the heaviest spring rate torsion bars in front of the ranger/ explorers. As long as you keep it within 2-2.5" of the stock ride height, you are good. There's a way to determine the " ride height" in the shop manual by measuring off the ball joint and lower control arm bolt. When I cranked the torsion bars, I used that for a guideline.
Fordtruckfan89
Member
- Joined
- Dec 15, 2004
- Messages
- 501
- Reaction score
- 282
- Location
- beaverton, OR
- What engine do you have?
- V6 engine
- What year is your Sport Trac?
- 2004
- What Generation is your Sport Trac?
- 1st Gen Owner
not sure of your year but 04, 05s were hard to find bolt on kits but superlift did a short run and have left over parts that you could piece together but they do not offer the parts as a kit, its 4 inch and with mine i had to do air bags in back to take up some sag. short of that body lifts are cheap and some what easy. if its 03 or earlier there is a few kits out there.
